Toshiba 4511 用户手册

e-STUDIO3511/4511 ADJUSTMENT

3 - 94

November 2003  ©  TOSHIBA TEC

05/03

• If the transfer belt contacts with the front regulation plate or the gap between the transfer belt

and the rear regulation plate is less than 0.2 mm, rotate the adjustment screw counterclock-

wise (viewing from below) five-sixth turn.

Less than 0.2mm

Adjustment screw

• Do not rotate the adjustment screw counterclockwise (viewing from below) 2.5 turns or more.

The screw may come off.

• Before turning the adjustment screw, make a mark on the reference face and a note of the

turning direction of the screw and the number of turning faces. These preparations make the

adjustment efficient.

• To readjust the screw according to the result of step (13), follow the turns in the list blew.

Number of adjustment

Number of turns

1st

5/6 turn

Readjustment

Result A

Result B

2nd

5/6 turn

2/6 turn

3rd

5/6 turn

1/6 turn

4th

-

1/6 turn