Toshiba 3000 用户手册

1. Remove two rubber seals at the top corners of the
    display assembly and two mask seals at the bottom 
    corners of the display assembly.
2. Remove 

four M2.5x5 silver screws securing the display

    mask.
3. There are 21 latches securing the display mask.
    Carefully insert your fingers between the display mask
    and the LCD module and pry open the latches starting 
    from the bottom six latches, to the five latches on the
    right and left sides, ending with the top six latches.

TM

TOSHIBA

Tough Enough for Today’s World

Latch

Mask seals

Display
mask

LCD

LCD module

FL inverter board

FL cable

LCD/
FL cable

M2x4 brass screws

Tape

M2x3 silver
screws

LCD/FL cable

1. Peel off the tape securing the FL cable.
2. Remove two M2.5x5 silver screw securing 
    FL inverter board.
3. Carefully lift up the FL inverter board and disconnect
    the LCD/FL cable from CN1 and the FL cable
    from CN2.
4. Remove two 2.5x6 black screws securing the LCD
    top cover.
 

5. Lay the top cover as shown above.
6. Peel off two capton tapes securing the LCD/FL cable
    and disconnect the cable.
7. Remove four M2x3 silver screws securing the LCD
    module to the LCD brackets and lift out the module.