Toshiba 5100 用户手册

TM

TOSHIBA

Tough Enough for Today’s World

1. 

Remove two mask seals at the bottom corners of the

    display assembly using a pair of fine-tipped tweezers.
2. Remove two M2.5x6 flat head brack screws securing
    the display mask.
3. 

There are 22 latches securing the display mask.

    Carefully insert your fingers between the mask and the
    LCD panel and pry open the latches starting from the
    bottom six latches, to the five latches on the right  
    and left sides, ending with the six toplatches.

Latch

Mask seals

Display
mask

LCD

LCD module

M2x5 silver screw

FL inverter board

M2x5
brass
screws

M2x5 
brass
screws

Mask
seals

Mask
seals

LCD/FL cable

FL cable

1. Remove one M2x5 silver screw securing the 
    FL inverter board.
2. Carefully lift up the FL inverter board and 
    disconnect the LCD/FL cable from CN1 and the
    FL cable from CN2.
3. Remove four mask seals to expose four screws 
    securing the LCD module assembly.
4. Remove four M2X5 silver screws securing the 
    LCD module.
5. Carefully rotate out the top of the LCD module
    enough to access the display cable
6. Peel off the tape securing the LCD/FL cable and
    disconnect the cable.