Standard Horizon GX3000S 用户手册
GX3000S
Page 12
O
FFSET
T
IME
T
ABLE
8.4 CHECKING GPS CONNECTIONS
After connections have been made between the GX3000S and the GPS, a
small satellite icon will appear on the top right corner of
the LCD display. To see the additional GPS information,
press and hold the [H/L(NAV)] key. The GX3000S shows
the Date, Time, SOG and COG.
small satellite icon will appear on the top right corner of
the LCD display. To see the additional GPS information,
press and hold the [H/L(NAV)] key. The GX3000S shows
the Date, Time, SOG and COG.
8.5 CHANGING THE GPS TIME
From the Factory the GX3000S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
offset is needed to show the local time in your area.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
Time Set
” with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select time off-
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “
set time from UTC. If “
0:00
” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
GMT Greenwich Mean Time).
5. Press the [ENT] key to store the time offset.
6. Press the [16/9] key or turn the CHANNEL selector knob to select “
6. Press the [16/9] key or turn the CHANNEL selector knob to select “
Exit
,”
then press the [ENT] key to return to the “
Radio Setup
” menu, select “
Exit
”
and press the [ENT] key to return to radio operation.