Standard Horizon GX3000S 用户手册
GX3000S
Page 56
11.9 POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the GX3000S to send the position.
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the GX3000S to send the position.
11.9.1 Setting up a Position Send Ringer
The GX3000S has the capability to turn off the Position Send ringer.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Turn the CHANNEL selector knob to select “
DSC
Setup
” menu.
3. Press the [ENT] key, then select “
DSC Beep
” with
the CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “
5. Turn the CHANNEL selector knob to select “
POS
Send
.”
6. Turn the CHANNEL selector knob to select “
Off
.”
7. Press the [ENT] key to store the selected setting.
8. To exit this menu and return to radio operation mode
8. To exit this menu and return to radio operation mode
press the [16/9] key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “
peat the above procedure, turning the CHANNEL selec-
tor knob to select “
On
” in step “6” above.
11.9.2 Transmitting a DSC Position Send Call
Pre-Programmable Calling
1. Press the [CALL(MENU)] key.
1. Press the [CALL(MENU)] key.
The “
DSC Operation
” menu will
appear in the display.
2. Turn the CHANNEL selector
knob to select the “
POS Send
.”
3. Press the [ENT] key to select the Individual directory.
4. Turn the CHANNEL selector knob to select a name
4. Turn the CHANNEL selector knob to select a name
in the directory, then press the [ENT] key.
5. Press the [ENT] key to send your position to the se-
lected vessel.