3M eg3 用户手册
Dosimetry
The Edge Models
053-644, Rev E
Page 6
eg4 & eg3
6
Quest Technologies offers two Edge models. The “eg4” model features two virtual
dosimeters with data logging. Once the parameters are set and saved in the dosimeter, you
can monitor two different dosimeters by a single press of the Enter button. This will toggle
dosimeters with data logging. Once the parameters are set and saved in the dosimeter, you
can monitor two different dosimeters by a single press of the Enter button. This will toggle
you between the two dosimeters. The “eg3” model is equipped with one dosimeter setting
and will not data log.
and will not data log.
Figure 1-3: Parameter setup screen for eg4
You can monitor and log noise studies by enabling two different parameter settings in one
dosimeter, also referred to as “virtual dosimeters”. For instance, you may want to set one
dosimeter to log using the OSHA HC (Occupational Safety and Health Administration -
dosimeter to log using the OSHA HC (Occupational Safety and Health Administration -
Hearing Conversation) parameters and also monitor noise with the OSHA PEL
(Occupational Safety and Health Administration – Permissible Exposure Level) settings.
A few scenarios of virtual dosimeters include:
Industrial noise control
Hearing conservation compliance
(Occupational Safety and Health Administration – Permissible Exposure Level) settings.
A few scenarios of virtual dosimeters include:
Industrial noise control
Hearing conservation compliance
Work site assessments
Personal noise verification
Personal noise verification
Military applications
Regulatory compliance (i.e., OSHA, MSHA, IEC, ACGIH)
Regulatory compliance (i.e., OSHA, MSHA, IEC, ACGIH)