Regency I31-LPG3 用户手册

下载
页码 28
17
Regency I31-3 Gas Fireplace Inbuilt
MAINTENANCE
INSTRUCTIONS
1) Always turn the gas valve to off
before cleaning. For relighting, re-
fer to lighting instructions. Keep the
burner and control compartment
clean by brushing and vacuuming
at least once a year.
When cleaning the logs, use a clean
soft paint brush as the logs are
fragile and easily damaged.
2) Clean (never when unit is hot) ap-
pliance, door and louvres with a
damp cloth.  Never use an abrasive
cleaner. The gold louvres (and
optional gold door) may be
scratched if abrasives are used to
clean them.
The heater is finished in a heat
resistant paint and should only be
refinished with heat resistant paint
(not with wall paint). Regency uses
StoveBrite Paint - Metallic Black
#6309.
3) Make a  periodic check of burner for
proper position and condition. Vis-
ually check the flame of the burner
periodically, making sure the flames
are steady; not lifting or floating. If
there is a problem, call an author-
ised service person.
4) The appliance and flueing system
must be inspected before use, and
at least annually, by an authorised
field service person, to ensure that
the flow of combustion and venti-
lation air is not obstructed.
During the annual service call, the
burners should be removed from
the burner tray and cleaned. Re-
place the embers but do not block
the pilot.
5) Keep the area near the appliance
clear and free from combustible
materials, gasoline and other flam-
mable vapours and liquids.
Pilot Flame:
While the pilot flame is on it can make a very
slight "whisper" sound.
Gas Control Valve:
As the gas control valve turns ON and OFF, a
dull clicking sound may be audible, this is normal
operation of a gas regulator or valve.
Unit Body/Firebox:
Different types and thicknesses of steel will
expand and contract at different rates resulting
in some "cracking" and "ticking" sounds will be
heard throughout the cycling process.
COPY OF LIGHTING INSTRUCTION PLATE
OPERATING INSTRUCTIONS
ANY SERVICING OR
REPAIRS SHOULD
BE CARRIED
OUT ONLY BY AN
AUTHORISED
PERSON.
WARNING:  CHILDREN AND
ADULTS SHOULD BE ALERTED
TO THE HAZARDS OF HIGH SUR-
FACE TEMPERATURE AND
SHOULD STAY AWAY TO AVOID
BURNS OR CLOTHING IGNITION.
YOUNG CHILDREN SHOULD BE
CAREFULLY SUPERVISED WHEN
THEY ARE IN THE SAME ROOM AS
THE APPLIANCE.
FOR YOUR SAFETY READ BEFORE LIGHTING
DO NOT REMOVE THIS INSTRUCTION PLATE
 
LIGHTING INSTRUCTIONS
TO TURN OFF GAS APPLIANCE
1) Push  in  the  gas  control  knob  slightly  and  turn
clockwise          to “OFF”. Do not force.
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property
damage,  personal  injury  or  loss  of  life.  Improper  installation,  adjustment,  alteration,  service  or
maintenance can cause injury or property damage. Refer to the owner’s information manual provided
with this appliance. For assistance or additional information consult a qualified installer, service agency
or gas supplier.
Release  knob  and  it  will  pop  back  up.  Pilot  should
remain  lit.  If  it  goes  out,  repeat  steps  3)  and  4).    If
knob  does  not  pop  up  when  released,  stop  and
immediately  call  your  service  technician  or  gas
supplier.  If  the  pilot  will  not  stay  lit  after  several
tries,  turn  the  gas  control  knob  to  “OFF”  and  call
your  service  technician  or  gas  supplier.
5) Turn  gas  control  knob  counterclockwise                to
“ON”.
6) Use  rocker  switch  to  operate  main  burner.
This appliance must be installed in accordance with local codes, if any; if none, follow the National Fuel Gas Code, ANSI Z223.1/NFPA 54,
or Natural Gas and Propane Installations Codes, CSA B149.1. (Australia: AS5601-2004/ New Zealand: NZS 5261)
2) Turn  off  all  electric  power  to  the  appliance  if
service  is  to  be  performed.
a  qualified  service  technician.  Force  or  attempted
repair  may  result  in  a  fire  or  explosion.
D) Do  not  use  this  appliance  if  any  part  has  been
under  water.  Immediately  call  a  qualified  service
technician  to  inspect  the  appliance  and  to  replace
any part of the control system and any gas control
which  has  been  under  water.
908-401c
STOP!  Read  the  safety  information  above  on  this
label.
1) Push  in  gas  control  knob  slightly  and  turn
clockwise        to “OFF”. Knob cannot be turned
from  “PILOT”  to  “OFF”  unless  knob  is  pushed  in
slightly.  Do  not  force.
2) Wait  five  (5)  minutes  to  clear  out  any  gas.  If  you
then  smell  gas  STOP!  follow  “B”  in  the  safety
information  above  on  this  label.  If  you  do  not
smell  gas,  go  to  the  next  step.
3) Turn  knob    on  gas  control  counterclockwise
to “PILOT”          .
4) Push  in  control  knob  all  the  way  and  hold  in.
Immediately  push  black  button  on  spark  igniter
until  pilot  lights.  Continue  to  hold  the  control
knob  in  for  about  1/2  minute  after  the  pilot  is  lit.
A) This  appliance  has  a  pilot  which  must  be  lighted
by    hand,    following    the    instructions  below
exactly.
B) BEFORE LIGHTING smell all around the appliance
area  for  gas.  Be  sure  to  smell  next  to  the  floor
because  some  gas  is  heavier  than  air  and  will
settle  on  the  floor.
WHAT TO DO IF YOU SMELL GAS:
- Do  not  try  to  light  any  appliance.
- Do not touch any electric switch, do not use any
phone  in  your  building.
- Immediately  call  your  gas  supplier  from  a
neighbors  phone.  Follow  the  gas  supplier’s
      instructions.
- If  you  cannot  reach  your  gas  supplier,  call  the
fire  department.
C) Use  only  your  hand  to  push  in  or  turn  the  gas
control knob. Never use tools. If the knob will not
push in or turn by hand, do not try to repair it, call
This appliance needs fresh air for safe operation and
must  be  installed  so  there  are  provisions  for
adequate  combustion  and  ventilation  air.
CAUTION: Hot while in operation. Do not touch.
Severe  Burns  may  result.  Due  to  high  surface
temperatures keep children, clothing and furniture,
gasoline and other liquids having flammable vapors
away. Keep burner and control compartment clean.
See  installation  and  operating  instructions
accompanying appliance.
You may shut off the pilot during prolonged non use periods to conserve fuel.