Toshiba 46TL900A 用户手册
CONTROLS AND FEATURES
40
There are 2 methods for Wireless Setup:
Assisted setup by using the Wi-Fi Routers
notifi cation information.
notifi cation information.
Network name, Authentication and Encryption are
decided based on information sent from the Wi-Fi
router. Security key to be set manually.
decided based on information sent from the Wi-Fi
router. Security key to be set manually.
Manual setup
Network name, Authentication, Encryption and
Security Key all to be inputted manually.
Security Key all to be inputted manually.
Assisted Setup
a
In
the
Preferences menu, press
B or b to
select Network Setup and press OK.
b
Press
B or b to select Network Type and
press
C or c to select Wireless.
c
Press
B or b to select Wireless Setup and
press OK.
d
Press
B or b to select Assisted Setup and
press OK.
Wireless Setup
Assisted Setup
Manual Setup
e
Press
B or b to select the desired AP and
press OK.
NOTE: Check the MAC address on the label
of the AP or in the manual, and select your
AP.
of the AP or in the manual, and select your
AP.
f
Highlight
Security Key and press OK. The
Software Keyboard window will appear.
g
Input the Security Key by using the Software
Keyboard (see page 43). To save your setting,
press the BLUE button.
Keyboard (see page 43). To save your setting,
press the BLUE button.
NOTE:
The Security Key must adhere to these
•
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex
characters
There is only one key ID to set for WEP
•
encryption.
h
Highlight
Done and press OK.
NOTE: If Network Name is not displayed,
see step 4 and 5 in Manual Setup below to
set Network Name before pressing Done.
see step 4 and 5 in Manual Setup below to
set Network Name before pressing Done.
NOTE: Settings are not saved if BACK is pressed
before Done is selected.
before Done is selected.
Manual Setup
a
In
the
Preferences menu, press
B or b to
select Network Setup and press OK.
b
Press
B or b to select Network Type and
press
C or c to select Wireless.
c
Press
B or b to select Wireless Setup and
press OK.
d
Press
B or b to select Manual Setup and
press OK.
e
Press
B or b to select Network Name and
press OK. The Software Keyboard window
will appear.
will appear.
f
Input the Network Name by using the
Software Keyboard (see page 43). To save
your setting, press the BLUE button.
Software Keyboard (see page 43). To save
your setting, press the BLUE button.
g
Press
B or b to select Authentication and
press
C or c to select Open System, Shared
Key, WPA-PSK or WPA2-PSK.
h
Press
B or b to select Encryption and press
C or c to select None, WEP, TKIP or AES.
NOTE:
Certain encryption types are only compatible
•
with specifi c authentication types.
- When Authentication is Open System,
- When Authentication is Open System,
only WEP or None is compatible.
- When Authentication is Shared Key, only
WEP is compatible.
- When Authentication is WPA-PSK or
WPA2-PSK, only TKIP or AES is compatible.
When incompatible Authentication/
•
Encryption pairings are detected, a
warning message will be displayed, and
no connection attempt will be made until
the incompatibility is resolved.
There is only one key ID to set for WEP
warning message will be displayed, and
no connection attempt will be made until
the incompatibility is resolved.
There is only one key ID to set for WEP
•
encryption.
i
Press
B or b to select Security Key and
press OK.
j
Input the Security Key by using the Software
Keyboard (see page 43). To save your setting,
press the BLUE button.
Keyboard (see page 43). To save your setting,
press the BLUE button.
NOTE: This item is grayed out when
Encryption is None.
Encryption is None.
k
Highlight
Done and press OK.
NOTE: When Encryption is None, a
message will appear. Press
message will appear. Press
C or c to select
Yes and press OK.
NOTE: Settings are not saved if BACK is pressed
before Done is selected.
before Done is selected.