Philips BDL8470QT/00 用户手册

BDL8470QT

6

You can set the remote control ID when you want to use this remote

control on one of several different displays.

Press [ID] button. The red LED blinks twice.
1.  Press [ID SET] button for more than 1 second to enter the ID

Mode. The red LED lights up.

Press the [ID SET] button again will exit the ID Mode. The red LED

lights off.

Press the digit numbers [0] ~ [9] to select the display you want to

control.

For example: press [0] and [1] for display No.1, press [1] and [1] for

display No.11.

The numbers available are from [01] ~ [255].
2.  Not pressing any button within 10 seconds will exit the ID Mode.
3.  If an error pressing of buttons other than the digits occured, wait

1 second after the red LED lights off and then lights up again, then

press the correct digits again.

4.  Press [ENTER] button to confirm. The red LED blinks twice and

then lights off.

•  Press [NORMAL] button. The green LED blinks twice, indicating the

display is in normal operation.

•  It is necessary to set up the ID number for each display before

selecting its ID number.

•  Use “ F ” (pause) key on the remote controller to freeze the

screen. Use “ I ” (play) key on the remote controller to unfreeze

the screen.

•  The “freeze” feature only can be adopted on “real” video sources

like VGA, AV, YPbPr, HDMI, DVI, DP.

•  Any operation on the remote controller or video mode change will

unfreeze the screen.