Brother HE-120 业主指南
Buttonhole Stitching 83
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8 inch) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
a
Reinforcement stitching
The names of parts of buttonhole foot "A", which is
used for sewing buttonholes, are indicated below.
used for sewing buttonholes, are indicated below.
a
Button guide plate
b
Presser foot scale
c
Pin
d
Marks on buttonhole foot
e
5 mm (3/16 inch)
a
Use chalk to mark on the fabric the position
and length of the buttonhole.
and length of the buttonhole.
a
Marks on fabric
b
Pull out the button guide plate of buttonhole
foot "A", and then insert the button that will be
put through the buttonhole.
foot "A", and then insert the button that will be
put through the buttonhole.
1
1
1
1
5
2
1
3
4
A
1
A
SE-BrotherE_sgml.book Page 83 Monday, June 30, 2003 3:44 PM