Toshiba A8-EZ8511 参考指南
27
Adding memory (optional)
5.375 x 8.375 ver 3.1
(Sample Illustration) Unscrewing the memory module slot cover
7
Remove the memory module slot cover.
8
Place the screw and the cover in a safe place so that you can
retrieve them later.
retrieve them later.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
computer. Grease or dust on the connector may cause memory
access problems.
9
Carefully remove the new memory module from its antistatic
packaging, without touching its connector.
packaging, without touching its connector.
The computer contains two memory slots. You can insert the
module into any available slot.
module into any available slot.
10 Locate an empty memory slot on the underside of your
computer.
If no memory slot is available, you must remove a module by
performing steps 2-3 of “Removing a memory module” on page 29.
performing steps 2-3 of “Removing a memory module” on page 29.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before removing/
installing the bottom module.
another, you must remove the top module first before removing/
installing the bottom module.
11 Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector’s notch with the matching key in the
socket.
aligning the connector’s notch with the matching key in the
socket.
Front of computer
GMA500387010.book Page 27 Thursday, December 28, 2006 12:48 PM