Toshiba A8-EZ8511 参考指南
41
Mobile computing
5.375 x 8.375 ver 3.1
6
Slide the battery release latch to release the battery.
7
Pull the discharged battery out of the computer.
(Sample Illustration) Removing the battery
If the battery is leaking or its case is cracked, put on protective gloves
to handle it, and discard it immediately. Always dispose of used battery
packs in compliance with all applicable laws and regulations. Put
insulating tape, such as cellophane tape, on the electrode during
transportation to avoid a possible short circuit, fire or electric shock.
Failure to do so could possibly result in serious injury.
to handle it, and discard it immediately. Always dispose of used battery
packs in compliance with all applicable laws and regulations. Put
insulating tape, such as cellophane tape, on the electrode during
transportation to avoid a possible short circuit, fire or electric shock.
Failure to do so could possibly result in serious injury.
Inserting a charged battery
To insert a battery:
1
Wipe the terminals of the charged battery with a clean cloth to
ensure a good connection.
ensure a good connection.
2
Insert the charged battery into the slot until the latch clicks.
The battery has been designed so that you cannot install it with
reverse polarity.
reverse polarity.
If the battery does not slide into the slot easily, move the battery
release lock to the unlocked position and try again. Do not force the
battery into position.
release lock to the unlocked position and try again. Do not force the
battery into position.
3
Slide the battery lock to the locked position.
4
Turn the computer right side up.
5
Reconnect any cables that were removed in step 3 of
“Removing the battery from the computer” on page 40.
“Removing the battery from the computer” on page 40.
6
Restart the computer.
GMA500387010.book Page 41 Thursday, December 28, 2006 12:48 PM