Toshiba M40 用户指南
User’s Manual
4-12
Operating Basics
■
In writing to a DVD-R/-RW, DVD+R/+RW or DVD+R DL disc, some disc
space is required for file management, so you may not be able to write
the full capacity of the disc.
■
Since the disc is based on the DVD standard, it will be filled with dummy
data if the written data is less than about 1 GB. Even if you write only a
small amount of data, it might take time to fill in the dummy data.
■
When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
■
Be sure to connect the universal AC adaptor before you write or rewrite.
■
Write from the computer’s HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
■
Writing with software other than RecordNow! is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW, DVD+R/+RW or DVD+R DL disc.
■
Do not perform any of the following actions:
■
Change users in the Windows XP operating system.
■
Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
■
Start a communication application such as a modem.
■
Apply impact or vibration to the PC.
■
Install, remove or connect external devices, including the following:
PC Card, USB devices, external display, i.LINK devices, optical
digital devices.
■
Use the Audio/Video control button to reproduce music or voice.
■
Open the CD-RW/DVD-ROM, DVD+-R/+-RW drive.
■
Do not use shut down/log off and standby/hibernation while writing or
rewriting.
■
Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the CD-RW/DVD-
ROM, DVD+-R/+-RW drive tray.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.