Bosch mic400albcp13518n 规格指南

MIC Series 400 Camera | 3

Lens

F=4.1 mm (wide) to 73.8 mm (tele), F1.4 to

F3.0

Zoom

18x optical (12x digital)

Angle of view

48° (wide) to 2.8° (tele)

Minimum illumination

0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)

0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)

0.01 lux (F1.4, 1/4s NTSC, 1/3s PAL ICR on)

Shutter speed

1/1 to 1/10,000 s (22 steps) NTSC, PAL

Lens

F=3.4 mm (wide) to 122.4 mm (tele), F1.6 to

F4.5

Zoom

36x optical (12x digital)

Angle of view

57.8° (wide) to 1.7° (tele)

Minimum illumination

1.4 lux (1/60 s NTSC, 1/50 s PAL, typical,

F1.6, 50IRE);

0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,

50IRE)

ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s

PAL)

Shutter speed

1/4 to 1/10,000 s (20 steps) NTSC, 1/3 to

1/10,000 s (20 steps) PAL

Auto flip

Yes

Manual flip

Yes

Dynamic privacy zones

3D privacy masking with infinite zones, (some

models, see ordering guide)

Presets

64 telemetry presets utilizing resolver technol-

ogy (using FV protocol, 10 camera set-up pre-

sets to allow ANPR, color correction etc.)

Preset tours

6 tours each with up to 32 presets

Sector titles

Yes (64 sectors) 20 characters per title

Preset titles

20 character caption for each of the 64 pre-

sets

Home position

Yes (preset 1 or tour)

Communication

RS485 / RS422

Control protocol

Bosch or FV protocol cameras available, addi-

tional supported protocols are Pelco D, Kala-

tel, 360 Vision, American Dynamics, Panason-

ic, Molynx, VCL, and Vicon.

These can be loaded using the MIC-

USB485CVTR signal converter and Cam-set

via a PC.

Biphase control requires a Biphase to RS485

converter (MIC-BP4, available separately) to

connect to Bi-phase equipment.

Video

Co-axial via composite cable

Telemetry control card

Built-in

Telemetry

Twisted pair. Simplex, half and full duplex op-

eration via composite cable

MIC Universal Camera

Setup Software Utility

(Cam-set)

Supplied with each camera, Cam-set allows di-

rect connection to a USB equipped PC via the

MIC Series PSU or over a full duplex or IP net-

work to provide access to all camera functions

and useful diagnostic tools.

USB to RS485 signal con-

verter

Allows MIC Series cameras to connect to a PC

(supplied free with MIC Series 400 camera or

available separately).

Power

Via composite cable

Alarm inputs

1 tamper input (additional inputs possible with

optional alarm card in PSU)

Alarm communication

Tamper switch (ground connection)

Drive unit

Brushless, integral pan/tilt motor drive

Pan angle

360° continuous rotation

Pan speed

6° to 90° per second (variable)

Tilt angle

270°

Tilt speed

0.2° to 90° per second (variable)

Speed control

Closed loop electronics

Preset accuracy

±0.56° (typical)

Proportional Pan/Tilt to

Zoom

Yes

Construction material

Machined aluminum

Viewing window

Tempered flat glass

Window wiper

Standard, long-life silicone wiper

Heater

Standard

Standard colors

Black( RAL9005), Gray (RAL7001) or White

(RAL9003)

Standard finish

Alodine 5200 surface treatment with powder

coat paint

Dimensions (WxHxD)

205 x 360 x 165 mm

(8.07 x 14.17 x 6.50 in.)

(upright and inverted)

Weight

5.5 kg (12 lb) including 4-in. pitch circle diam-

eter (PCD) base

Configurations available Upright mount or upright canted at 45° mount.

(Inverted mount is possible using software set-

ting and upright camera.)

Operational temperature -40 °C to +50 °C (-40 °F to +122 °F)
Weather proofing

IP68

MTBF

73,817 hours