GE 28041ee2 用户指南

54

No dial tone

• Check and repeat installation steps:
  Ensure the base power cord is connected to a working electrical outlet .
  Ensure the telephone line cord is connected to the base and the wall jack.
• Connect another phone to the same jack; if there is still no dial tone, the problem 

might be your wiring or local service.

• The handset may be out of range of the base. Move closer to the base.
• Ensure the battery is properly charged (16 hours).
• Ensure the battery pack is installed correctly. 
• The handset should beep when you press the TALK/CALL BACK button and the 

charge indicator on the base should be lit when the handset rests in the cradle. If 
not, the battery may need to be charged.

• Place handset in charge cradle for at least 0 seconds to reset the unit.

Handset does not ring  

• Make sure the handset ringer switch is turned ON, this can be done through the 

handset setup menu - Ringer Volume.

• The handset may be out of range. Move closer to the base.
• You may have enabled Do Not Disturb (DND). Make sure the DND is off.
• You may have too many extension phones on your line. Try unplugging some 

phones.

• Check for dial tone. 

You experience static, noise, or fading in and out

• The handset may be out of range of the base. Move closer to the base.
• Make sure base is not plugged into an outlet with another household appliance. 

If necessary, relocate the base.

• Charge the battery.