Tenda w306r 用户指南

In this mode, you can expand the scope of 
network by combining up to four other access 
points together, and every access point can still 
accept wireless clients. 
 
Lazy Mode: You need configure the router’s 
BSSID into another device, not need input 
another router’s BSSID in it, and then connect 
together automatically.   

 

Bridge Mode: You can wirelessly connect two or 
more wired networks via this mode.

 

In this mode, 

you need to add the Wireless MAC address of 
the connecting device into the Router's AP MAC 
address table or select one from the scanning 
table. At the same time, the connecting device 
should be in Lazy, Repeater or Bridge mode. 
 
Repeater Mode:

 

You can select the mode to 

extend the distance between the two WLAN 
devices. Functioning as a WDS repeater, the 
W306R connects to both a client card as an AP 
and to another AP. In typical repeater 
applications, APs connecting to other APs 
equipped with WDS functionality must also 
support WDS. In this mode, you need to add the 
MAC address of the connecting device into the 

 

 

 

 

 

 

32