RCA drc8052 用户指南
Graphics contained within this publication are for representation only.
34
Chapter 4: Menu System
Audio
Digital Output Mode
If you connected your DVD recorder to a receiver via the DIGITAL AUDIO OUT jack on the back
of the player, choose the type of receiver (or decoder) signal you have.
If you connected your DVD recorder to a receiver via the DIGITAL AUDIO OUT jack on the back
of the player, choose the type of receiver (or decoder) signal you have.
• PCM
Provides converted CD-quality stereo. You would use this setting if you didn’t have a
DTS or Dolby Digital compatible receiver.
• RAW
Provides the original multi-channel digital audio signal for use with DTS or Dolby
Digital compatible receivers.
Note: If you’re using a DTS or Dolby Digital receiver with the digital audio coaxial
connection, make sure you set the Digital Output Mode to RAW, otherwise you
won’t hear any sound.
connection, make sure you set the Digital Output Mode to RAW, otherwise you
won’t hear any sound.
Dynamic Range Control
This feature allows you to even out the volume during playback.
This feature allows you to even out the volume during playback.
• On
This setting cuts down the volume dynamics when you want to watch a program or movie
at night without disturbing anyone.
• Off
Dynamic Range Control is off and the volume dynamics are set to normal.
TV Channel Menu
You can scan all available channels and edit them in the TV Channel menu.
Auto Scan
Highlight the Auto Scan icon and press OK. Choose the type of signal you have (antenna or cable)
and press OK. The unit searches for all available channels.
and press OK. The unit searches for all available channels.
•
To add or remove channels from the channel list, highlight the Skip Item icon at the bottom of
the screen and press OK. The Skip icon is added or removed from the channel in the channel
list. If you remove a channel from the channel list, you can still access it by using the number
buttons on the remote.
the screen and press OK. The Skip icon is added or removed from the channel in the channel
list. If you remove a channel from the channel list, you can still access it by using the number
buttons on the remote.
•
To exit at any time, highlight the Exit icon and press OK.
The Schedule menu, with a timer
recording schedule set up.
recording schedule set up.
The TV Channel menu, with Auto
Scan selected.
Scan selected.
Schedule Menu (Timer Recording)
Timer recordings are explained in detail on page 23.