Toshiba M100 用户指南
135
Expansion Options
Using external display devices
5.375 x 8.375 ver 2.4.0
5
Turn on the computer.
For a parallel or serial printer, never connect the printer cable
while the computer’s power is on. Doing so may damage the
printer, the computer, or both.
while the computer’s power is on. Doing so may damage the
printer, the computer, or both.
Using external display devices
Your computer comes with a built-in LCD display, but you
can easily attach an external monitor to your computer if you
need a larger screen. To do this:
can easily attach an external monitor to your computer if you
need a larger screen. To do this:
1
Connect the monitor’s video cable to the RGB (monitor)
port on the back of the computer.
port on the back of the computer.
2
Connect the monitor’s power cable to a live electrical
outlet.
outlet.
3
Turn on the external monitor.
4
Set the display mode by pressing
Fn + F5
, or by setting the
Display Properties settings. For more information, see
.
Directing the display output when you turn on the computer
Once you’ve connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
Fn
+
F5
):
1
Press
Fn
and
F5
simultaneously.
2
While holding down
Fn
, press
F5
repeatedly until the
setting you want takes effect.
This hot key cycles through the settings in the following
order:
order:
❖
Built-in display panel only