Toshiba TDP-S9 业主指南
21
Operations
Operations
■ Connecting the power cord
1
Insert the power cord connector into the
AC IN socket of the projector.
AC IN socket of the projector.
2
Insert the power cord plug into a wall or
other power outlet.
other power outlet.
■ Turning the power on
1
Turn on the main power switch
The ON indicator will change to green
flashing, indicating standby mode.
flashing, indicating standby mode.
2
Press the I/ ON/STANDBY button.
The power turns on, and the following
2 green indicators light: ON and
LAMP. After a moment, the start-up
screen appears.
2 green indicators light: ON and
LAMP. After a moment, the start-up
screen appears.
Start-up screen
Control panel
Remote
Control
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
■ Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
turned on. If it is left on, it could become deformed due
to heat.
Turning the power on and off
Power cord connector
(Supplied)
(Supplied)
(Green)
Flashing
Flashing