Toshiba tdp-sp1u 用户指南

37

Wait for at least 1 hour.

Loosen the two screws, raise the lamp cover 
with your fingers as shown to remove the lamp 
cover. Use care to avoid any damage to nails 
and/or tip of your finger(s). If you have any dif-
ficulty in removal, you can use a screwdriver or 
any other smaller tool for your convenience. 

Remove the two locking screws and carefully set 
them aside. Then pull up the handle and remove 
the lamp.

Lamp cover

1

2

A lamp is consumable supply. If used for extended periods, images will appear dark, and the 

lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of 

the lamp depends on condition of use.) If this happens, replace it with a new one.

•

  Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger 

of damage from falling pieces of glass if the lamp is broken. Besides, working at high 

elevations can also be hazardous. Do not attempt to replace the lamp by yourself.

•

When replacing, always use lamp “TLPLV9” (sold separately). If the lamp other 

than the specified one is used, it may cause a malfunction or damage to the unit due 

to the difference in the connector shape or the lamp rate.

•

  Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•

1

2