Toshiba tdp-tw300u 快速安装指南
8
STARTING THE SOFTWARE APPLICATION (Continued)
• A list of successfully connected projectors (groups) is displayed, indicating Projector
[Name], [Manufacturer], [Power], [Input], [Mute], [Error], [IP Address], and [Group
Path] of the connected projectors. [X] will appear where connections failed due to wrong
password or other reasons, while [?] indicates a communications error.
Path] of the connected projectors. [X] will appear where connections failed due to wrong
password or other reasons, while [?] indicates a communications error.
• You can use the mouse to select a single group or projector, or hold down the Shift or
Ctrl key to make multiple selections.
• The functions operational from the Projector Management Utility are Power On/Off, Input
Selection, and Mute.
• The projector will not change to the input selected by the Projector Management Utility, if
not support it.
• The projector will not change to the Mute function (Picture, Voice, or Picture & Voice)
selected by the Projector Management Utility, if not support it.
If an error occurs on the projector, the error state will be displayed.
If an error occurs on the projector, the error state will be displayed.
Note
• The correspondence between Input Number and Input Name is shown below:
Only for TDP-TW300/TDP-TW300J
• Toshiba Projector does not support the following Mute functions: Picture only and Voice
only.
• As for details of the projectors provided by other manufacturers, refer to the instruction
manual supplied with the projector.
Toshiba Projector
PJLink Input Name
Input Name
Computer 1 (Digital)
Computer 1 (Digital)
Digital 1
Y/P
B
/P
R
1 (Digital)
Digital 2
Computer 1 (Analog)
RGB1
Y/P
B
/P
R
1 (Analog)
RGB2
Computer 2
RGB3
Y/P
B
/P
R
2
RGB4
Computer 3
RGB5
Y/P
B
/P
R
3
RGB6
Video
Video 1
S-Video
Video 2
Wireless/Card
Network 1
USB memory
Storage 1