Toshiba tlp-780 用户手册

Reset all

The adjustments and settings of all menus are returned to the factory default setting

EXEC.

H-reference reset

The horizontal reference value for "Auto. V-keystone" is calibrated automatically

EXEC.

• If the projector's foot adjuster is used or the projector is inclided, "H-reference reset" will not be executed properly.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button.  If the power cord is un-

plugged or if a power failure occurs while the projector is on, the settings are not memorized.

• You can return the adjusting and setting value of all menus to the factory default setting.  ("H-reference value" below also returns to the value at the

factory default setting.)

• The projector stores the standard conditions of horizontal installation, but depending on the usage environment (if the projector is subject to

vibrations or shock, etc.), the standard may change.
If the keystone distortion is not corrected properly when "Auto. V-keystone"          is executed with the screen installed vertically, put the projector's
foot adjustor back           and set the projector on a flat surface,  then execute "H-reference reset"

Notes

CONTENTS