Toshiba TLP-S10U 用户手册

25

24

■ Correcting the keystone distortion (Keystone)

When the foot adjuster 

 is used to change the

projection angle, the picture will undergo keystone (trap-
ezoidal) distortion.
This projector is capable of correcting this keystone distortion.

The Keystone menu appears.

On completing the adjustment, press the 

 button to dismiss the menu (you can also use the

CANCEL button on the remote control for menu dismissal). The trapezoidal distortion will be
automatically corrected. During the processing, the icon 

 is displayed.

Shrink button of the screen            Shrink top of the screen

Item

Description

• Depending on the amount of keystone adjustment and the content of images, some

information may be lost, or the picture quality may suffer.

• Keystone adjustment will not change the shape of the menus.

■ Zooming out the images

This equipment is provided with the digital zoom (electric zoom: 100-80%). (Note that
the display, if digitally zoomed out, may suffer from some degradation.)

Each time the ZOOM – button is pressed, the
image is reduced in size.

Each time the ZOOM + button is pressed, the
image size increases.
(You cannot make it larger than the original size.)

Before correction

After correction

■ Using auto setting (Auto setting)

This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.

The Auto setting menu appears.

The menu item is automatically adjusted/set.
For computer input, the 

 icon will appear during

processing.

• Auto adjustment/setting may not be performed correctly for input signals other than

those supported by the projector 

, 

.

● Manual adjustment and setting

The menu items vary depending on the input type, as shown in the table below.
Use the 

 

 

 

 

 buttons to adjust the items in the table below, then press

the 

 button when you are finished. The menu disappears. (The CANCEL button

on the remote control also allows you to exit the menu mode.)

Adjust with           to eliminate flicker.

Adjust with            to eliminate periodic patterns and 
flickering when many vertical lines appear on the screen.

Move left           Move right

Move up            Move down

Adjusts the clamp pulse position with       or      .

Adjusts the clamp pulse width with       or      .

Adjust with           to eliminate flicker.

Input

Item

Description

Select Item

Select Item

Signal format [     : Enter to setting mode]    [          : Select one 

of the following]    [Apply:     ]
480i(525i)@60Hz/480p(525p)@60Hz/

[     : Enter to setting mode]    [          : Select one 
of the followings]    [Apply:     ]

 

• Moving pictures generated with the DVD software for computers may appear

unnatural if it is projected with this projector, but it is not a malfunction.

• Pressing either the ZOOM-

or ZOOM+ button would
display the 

 icon.

• The adjustment value will

automatically be saved.