Toshiba tlp-x150u 用户指南

40

41

This menu shows placement status and other settings.

Item 

 

Description

Always corrects keystone distortion automatically. 

On 

Sets the time to wait for the power to be turned off after the last operation is 
made with no input signal. 

Off (not turned off)

 

Sets whether the input with signals is only selected or not. 

On 

Beeps when operation is made. 

On 

Sets whether to turn on the power when the ON/STANDBY button is pressed 
(Manual), or when the power cord is plugged in (Auto).
 

Manual 

Sets the lamp power. 

 

[On]:  Automatically searches the signals that can 

be projected, and switches input from the 
connected device that outputs the video signals 
each time the INPUT button is pressed. Input 
from a connected device that outputs no video 
signals is skipped.

[Off]:  Displays the Input select menu.
 

Toggle with 

 

 

buttons and press 

 

button. 

(The input without signals can be also selected.)

In normal operation, set [Auto input search] to [On]. 
Set to [Off] when you want to select the input source from Input select menu, or if 
the image does not appear properly.

If [Power on] is set to [Auto] and there is a power outage, the projector will come on 
once power is restored.

When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling 
fan noise gets quieter.



•

Item 

 

Description

Sets projection mode in accordance with Placement Style. 

 

(Standard)

 

 

 

(Rear)

 

 

 

(Ceiling)

 

 

 

(Rear ceiling)

Sets the cooling fan speed. 

 

Remote control When  projectors are used and controlled by the remote control respectively, 

this menu sets the code for the projector and the remote control.
[

 or 

: Enter setting] 

 [

: Select from 1, 2

] 

 [

: Confirm] 

  

[

:Select OK to end

]

Press [Cancel] to return.

Lock the control panel buttons.
[

 or 

: Enter setting] 

 [

: Select On/Off

] 

 [

: Confirm] 

  

[

:Select OK to end

]

Press [Cancel] to return.

Closed Caption Closed Caption settings.

Press 

 and switch with 

 and 

.  Off/ CC1/ CC2/CC3/CC4/T1/T2/T3/T4

Press 

. (The password and user logo are not reset.)

Resets all adjustments and settings to their factory settings.  Yes

 

Password setting 

Press 

. 

 Password registration/Password setting

Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise 
increases.) Set this option to use the projector at high altitude (over 1,500 meters 
above sea level).

Do not set Fan mode to [High] when using the projector at a lower altitude.

Sets a remote control code from  types. You can set each code respectively for up to 
 projectors. The factory setting is [1].
To switch codes, set the same code for the projector and the remote control.
A remote control code is applied after the setting is done.

You cannot operate the remote control if the codes of the projector and the remote 
control do not match.

Set the same remote control code switch as the projector. 

•

•