Quantum acl 4 安装指导
Chapter 2 Unpacking the Library
Unpacking the Library
ACL 4/52 Facilities Planning and Installation Guide
7
Unpacking the Library
2
Caution:
Use care when cutting the steel bands that secure the
library and packing materials to the pallet. These bands are
under tension and may snap when cut.
library and packing materials to the pallet. These bands are
under tension and may snap when cut.
1 Cut the steel bands that secure the library and packing material to
the pallet (see figure 7).
2 Lift the cardboard top cover off the pallet.
3 From the back of the container (opposite the ramp side), pull the
three cardboard retaining clips to their open position, and unwrap
the cardboard box from the library
the cardboard box from the library
Figure 7 Removing the
Box from the Pallet
Box from the Pallet
4 Lift the foam cap and accessories tray off the library (see figure 8).
5 Remove the stop block located underneath the library.
TA00139a
Ramp Side
(
Front/Off-load Side)
Top Cover
Steel Bands
Foam Cap and
Retaining
Clip (x3)
Clip (x3)
Cardboard Box
Pallet
Accessories Tray
TA00140a
➀
➁
➂