Sony DCR-HC21 手册

下载
页码 92
50
DCR-HC21 2-584-905-11(1)
Recording pictures from a 
VCR 
You can record pictures from a VCR on a 
tape. Insert a cassette for recording in your 
camcorder beforehand.
1
  Connect your VCR to your 
camcorder.
Use an i.LINK cable to connect.
See page 48 for details of connecting.
•  The 
 indicator appears when you 
connect your camcorder and other devices 
via an i.LINK cable.
2
  Slide the POWER switch down to 
turn on the PLAY/EDIT lamp.
3
  Set your camcorder to recording 
pause mode.
Touch 
 
[PAGE3]
[REC 
CTRL]
[REC PAUSE].
4
  Start playing the cassette on your 
VCR.
The picture played on the connected 
device appears on the LCD screen of 
your camcorder.
5
  Touch [REC START] at the point 
you want to start recording.
6
  Touch 
 (stop).
7
  Touch [ RET.] 
 
.
Dubbing sound to a 
recorded tape
You can add sound to a tape already 
recorded in the 12-bit mode (p. 45) without 
erasing the original sound.
Internal microphone
You can record audio by using the internal 
microphone.
•  You cannot record additional audio:
–  When the tape is recorded in the 16-bit mode 
(p. 45).
–  When the tape is recorded in the LP mode.
–  When the tape is recorded on another device 
with a 4ch microphone (4CH MIC REC).
–  When the tape is recorded in a TV color 
system other than that of your camcorder.
–  When your camcorder is connected via an 
i.LINK cable.
–  On blank sections of the tape.
–  When the write-protect tab of the cassette is 
set to SAVE.
•  When you add sound, the picture will not be 
output from the A/V OUT jack. Check the 
picture on the LCD screen or the viewfinder.
Recording sound
Insert a recorded cassette into your 
camcorder beforehand.
1
  Slide the POWER switch down to 
turn on the PLAY/EDIT lamp.
2
  Touch 
 (play/pause) to play 
back the tape, then touch it again 
at the point where you want to 
start recording the sound.