ASKProxima impression 960 用户指南
USER GUIDE
LCD PROJECTOR
14
your monitor and re-connect with the shortest lead of the V-split (1B).
Connect the longest lead of the V-split (1A) to the monitor BNC inputs.
Connect the longest lead of the V-split (1A) to the monitor BNC inputs.
7.1.4
ADAPTERS
If you have a computer that requires adapters to physically connect, insert
applicable adapter(s) onto the V-split of the PC compatible cable (2A,2B)
as described in the table on page 10.
applicable adapter(s) onto the V-split of the PC compatible cable (2A,2B)
as described in the table on page 10.
APPLICABLE CABLES/ADAPTERS :
COMPUTER
CABLE ADAPTER
VGA
None
MACII and PowerMac
MAC (option)
SUN
13W3 (option)
HP
None
(1
IBM RS6000
Power PC
Power PC
None
(1
13W3 (option)
Silicon Graphics
13W3 (option)
DEC
None
NCR
13W3 (option)
1)
Use either the PC cable or the BNC cable (varies with different models).
TO SET UP FROM THE REMOTE CONTROL :
To assist you in setting up and fine tuning the projector, fill a large portion
of your screen with a 50% grey pattern (alternating black and white pixels).
Then make sure that the projector is set to direct (1:1) default mode before
adjusting the frequency setting. This can be done by pressing the SCALE
button on the remote control.
To assist you in setting up and fine tuning the projector, fill a large portion
of your screen with a 50% grey pattern (alternating black and white pixels).
Then make sure that the projector is set to direct (1:1) default mode before
adjusting the frequency setting. This can be done by pressing the SCALE
button on the remote control.
STEP
OPERATION
1
Press RESET for default settings
2
Adjust FREQUENCY until all vertical bands disappear
3
Adjust TUNE for a stable image
4
Press POSITION, then use cursor keys to position the image
5
Adjust CONTRAST and BRIGHTNESS as desired
6
Press SCALE to compress/expand the image if desired