Netcomm V85 快速安装指南

V85 Desktop VoIP Phone Quick Start Guide 

11

YML771 Rev1 

Figure 3-3

If you can not connect from your PC or the configuration screen is not displayed

If your V85 does not show the “DHCP fail” error message in its LCD screen, you can 

assume the V85 is connected to your network.  However in some cases you still may not be 

able to open the V85 Configuration Page by entering the IP address of the device in your

PC web browser.  This is generally due to network configuration issues.  Try the following

procedure.
Check the connection between your PC and the V85 by using your PC’s “Ping” utility. 

To do this, open the DOS prompt (Start ► Run ► cmd) and execute the command ‘ping 

[V85 IP address]’. If you receive a ping reply from the V85, the PC and the V85 are able 

to communicate with each other. If you receive a time out or error message from your PC, 

there is a problem with the network configuration of your PC.   Please refer to Appendix C

in the User Guide on the V85 CD for instructions on network configuration under different

Windows Operating Systems.

The next step is to enter your VoIP account details. Entering these details registers your 

device on the VoIP service provides ‘SIP Server’ which allows other callers to connect to 

you.   Click on the left-hand menu item in the Overview screen, called ‘SIP’
If you have subscribed to a VoIP service, please consult your VoIP service provider for the 

following account details required to complete your V85 SIP configuration.  Items marked

with * are mandatory; others are optional and if no setting is indicated, leave as default.