KitchenAid kdrs407vss 安装指导

All ranges may require a backguard. See “Cabinet Dimensions” in 
the “Location Requirements” section. See the “Tools and Parts” 
section for information on ordering.

Remove island trim and attach backguard using 6 screws, insert 
3 from the front and 3 from the back (9" [22.9 cm] backguard 
shown). 

1. Determine which mounting method to use: floor or wall.

If you have a stone or masonry floor you can use the wall 
mounting method.

2. Determine and mark centerline of the cutout space. The 

mounting bracket must be installed on the right side of the 
cutout. Position mounting bracket in cutout as shown in the 
following illustration.

Measurement B:
30" (76.2 cm) ranges: 11

⁵⁄₈" (29.5 cm)

36" (91.4 cm) ranges: 14

⁵⁄₈" (37.1 cm)

48" (121.9 cm) ranges: 20

⁵⁄₈" (52.4 cm)

Measurement C:
Optional distance from backwall. If backwall is constructed 
of a combustible material and a backguard is not installed, 
a 6" (15.2 cm) minimum clearance is required for all models. 
Install anti-tip bracket accordingly. 

3. Drill two 

¹⁄₈" (3.0 mm) holes that correspond to the bracket 

holes of the determined mounting method. See the following.

4. Using the Phillips screwdriver, mount anti-tip bracket to the 

wall or floor with the two #12 x 1

⁵⁄₈" screws provided.

Depending on the thickness of your flooring, longer screws 
may be necessary to anchor the bracket to the subfloor. 
Longer screws are available from your local hardware store.

5. Move range close enough to opening to allow for electrical 

connections to be made. Remove shipping base, cardboard 
or hardboard from under range. 

6. Continue installing your range using the following installation 

instructions.

⁵⁄₈" screws

⁵⁄₈" screws

A

B

C

B

A

B

A