KitchenAid kudd01sspa 用户指南

下载
页码 44
17
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
Dishwasher is not operating properly
Dishwasher does not run or stops during a cycle
Is the drawer closed tightly?
Is the correct wash cycle selected? Refer to“Wash Cycles.”
Is there power to the dishwasher? Has a household fuse 
blown, or has a circuit breaker tripped? Replace the fuse or 
reset the circuit breaker. If the problem continues, call an 
electrician.
Is an Error Code indicated? (See “Error Codes.”)
Dishwasher will not fill
Is the water shut-off valve (if installed) turned on?
Dishwasher seems to run too long
Is the water supplied to the dishwasher hot enough? The 
drawer runs longer while heating water. Refer to the 
“Performance Tips” section.
A delay automatically occurs in some wash and rinse cycles 
until the water reaches the proper temperature.
Water remains in the dishwasher
Is the cycle complete? A small amount of water will remain in 
the drain filter area.
Excess water in the dishwasher
Are there blocked drain filters? Clean the drain filter and filter 
plate. (See “Cleaning.”)
Is the drain hose bent or kinked? Straighten or unblock 
hoses. (See “Error Codes.”)
Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle 
once or twice a day until you have a full load.
Does the drawer have a new plastic smell? Run a vinegar 
rinse as described in “Spotting and filming on dishes.”
Dishes are not completely clean
Food soil left on the dishes
Is the dishwasher loaded correctly? If not, it can block 
rotation of the spray arm. Refer to the “Dishwasher Loading” 
section.
Can the spray arm rotate freely? Check that no items are 
obstructing the spray arm path.
Are the spray arm holes blocked? Clean the spray arm. See 
“Cleaning the Spray Arm, Drain Filter and Filter Plate” in 
“Cleaning” section.
Are the drain filter and filter plate clean and installed 
correctly? See “Cleaning the Spray Arm, Drain Filter and Filter 
Plate” in “Cleaning” section.
Is the base rack correctly installed? Refer to “Loading Rack.”
Is the water temperature too low? For best dishwashing 
results, water should be 120°F (49°C) as it enters the 
dishwasher. Refer to the “Performance Tips” section.
Is the correct cycle selected? Refer to “Wash Cycles.”
Did you use the correct amount of fresh detergent? Use 
recommended dishwasher detergents only. Refer to the 
“Detergent Use” section. Do not use less than 1 tsp (5 mL) 
per load. Detergent must be fresh to be effective. Store 
detergent in a cool, dry area. Heavy soil and/or hard water 
generally require extra detergent.
Is the pump or spray arm clogged by labels from bottles and 
cans? 
Is the home water pressure high enough for proper 
dishwasher filling? Home water pressure should be 20 to 
120 psi (138 to 828 kPa) for proper dishwasher fill. If you have 
questions about your water pressure, call a licensed, qualified 
plumber.
Are high suds slowing the wash arm? Do not use soap or 
laundry detergents. Use recommended powdered 
dishwasher detergents only. 
Spots and stains on dishes
Spotting and filming on dishes
Is your water hard or is there a high mineral content in your 
water? Conditioning the final rinse water with a liquid rinse 
aid helps eliminate spotting and filming. Keep the rinse aid 
dispenser filled.
Is the water temperature too low? For best dishwashing 
results, water should be 120°F (49°C) as it enters the 
dishwasher. Refer to the “Performance Tips” section.
Did you use the correct amount of effective detergent? Use 
recommended powdered dishwasher detergents only. Refer 
to the “Detergent Use” section. Do not use less than 1 tsp 
(5 mL) per load. Detergent must be fresh to be effective. Store 
detergent in a cool, dry area. Heavy soil and/or hard water 
generally require extra detergent.
Is the home water pressure high enough for proper 
dishwasher filling? Home water pressure should be 20 to 
120 psi (138 to 828 kPa) for proper drawer fill. If you have 
questions about your water pressure, call a licensed, qualified 
plumber. 
NOTE: To remove spots and film from dishes, try a white 
vinegar rinse. This procedure is intended for occasional use 
only. Vinegar is an acid and using it too often could damage 
your drawer.
1. Wash and rinse dishes. Remove all silverware or metal 
items.
2. Put 1 cup (250 mL) white vinegar in a glass or 
dishwasher-safe measuring cup on the rack.
3. Run the dishwasher through a complete washing cycle. 
Do not use detergent. Vinegar will mix with the wash 
water.