KitchenAid kudd03dtpa 安装指导
13
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16 gauge dishwasher wire.
4. Attach ground wire to the green ground screw.
5. Reinstall electric box cover with all wires contained inside the
terminal box.
NOTE: Do not plug cord into outlet until instructed to do so.
Install Trim Pieces and Level Dishwasher
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
2. Push in clips and slide rails back 5" (12.7 cm).
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
4. Slide the dishwasher into position in the cabinet opening.
Check to ensure that the drain hose and electrical wiring are
not kinked.
not kinked.
Power supply wire:
Terminal box wire:
white
white
black
black
ground wire
ground connector
A. Attach ground wire to green screw.
B. Attach white and black wires.
B. Attach white and black wires.
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
A
B
1
1
2
2