KitchenAid kuds01dlwh 用户手册

下载
页码 48
8
FLEXI-SPLIT™ divided tines
The row of tines on the right side of the top rack can be adjusted 
to make room for a variety of dishes.
To adjust the front half 
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the tine holder.
3. Move the tines to the left to make room for larger dishes. 
Move the tines to the right to wedge plastic or other 
lightweight items against the side of the rack.
To adjust the back half
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
SURE-HOLD™ light item clips
The light item clips hold lightweight plastic items such as cups, 
lids, or bowls in place during washing. 
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Adjustable 2-position top rack
You can raise or lower the top rack to fit tall items in either the top 
or bottom rack. Raise the top rack to accommodate items up to 
9 in. (22 cm) in the top rack and 13 in. (33 cm) in the bottom rack, 
or lower the top rack to accommodate items up to 11 in. (28 cm) 
in both the top and bottom racks. Adjusters are located on each 
side of the top rack.
To raise the top rack
Lift the rack on either, or both, sides until the rack is level.
NOTE: The top rack adjusters MUST be level. 
To lower the top rack
Press both rack adjusters and slide the rack back to its 
original position.
Removable Top Rack
The removable top rack allows you to wash larger items such as 
stock pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing upper rack from 
dishwasher.
To remove the top rack
1. Pull the rack forward slightly to access track stops.
2. To release, press the button of the track stop finger grip and, 
pull track stop out of the track.
3. After removing both track stops, pull rack out. 
To replace the top rack
1. Place the rollers on each side of the rack into the rack tracks 
and push the rack back.
2. While pushing the button in the center of the track stop finger 
grip, insert track stop into rack and slide until it locks into 
place. Release the button.
3. Pull on the track stop to make sure it is locked into place.
4. Repeat on the other side.
Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and 
utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom 
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the 
drawings shown. 
10 place setting