Aethra d2061 用户手册
USER’S MANUAL
ADSL TESTER D2061
3.2. Selecting a manual test
To select a manual test:
1
Open the TEST MENU.
The last used setup appears on the screen.
The last used setup appears on the screen.
2
Select the ACCESS type, i.e. ADSL.
3
Select ACT AS, i.e. ATU-R. The lower section of the
screen shows the selected network configuration.
screen shows the selected network configuration.
4
Select MANUAL TESTS.
5
Choose the test you want to perform.
6
Once configured all the parameters regarding the test
chosen, select °Use this setup for testing°.
chosen, select °Use this setup for testing°.
Each test is described in the following pages.
CHAPTER 3 - PERFORMING A MANUAL TEST
31