Aethra d2061 用户手册
USER’S MANUAL
ADSL TESTER D2061
LLC SNAP: Setup the packets’ routing mode. Choose Yes, to route the packets with
an LLC SNAP header.
an LLC SNAP header.
This method allows multiplexing of multiple protocols over a single ATM virtual circuit.
The protocol of a carried Protocol Data Unit (PDU) is identified by prefixing the PDU
by a Logical Link Control (LLC) header.
The protocol of a carried Protocol Data Unit (PDU) is identified by prefixing the PDU
by a Logical Link Control (LLC) header.
Choose No, to route the packets according to the VC in use. This second method
does higher-layer protocol multiplexing implicitly by ATM Virtual Circuits (VCs). It is
called "VC Based Multiplexing".
does higher-layer protocol multiplexing implicitly by ATM Virtual Circuits (VCs). It is
called "VC Based Multiplexing".
DNS server: Enter the DNS address which allows the solution of names from IP to
URL and vice versa.
URL and vice versa.
3.8.2. Running an IP Generate Traffic test
Once defined the setup to perform the test, continue as follows:
1
Select ‘Use this setup for testing’.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the IP GENERATE TRAFFIC test.
The LED RUN goes on and the test results appear on the screen.
4
Scroll through the result pages.
The result pages display the following information:
CHAPTER 3 - PERFORMING A MANUAL TEST
49