Cambridge SoundWorks 602 用户指南

Decide roughly where to place the 

speaker.  Using a stud-finder (or 

other means), locate any joists 

near these locations.  Adjust 

speaker placement so the ceiling 

cutout is not located directly below 

a joist.  Some speaker adjustment 

is available within the cutout.  

Use the supplied template to 

outline the area to be cut.  When 

cutting into a ceiling, be careful 

not to damage wiring, conduit, 

or plumbing.  A lath-and-plaster 

or plaster skim-coat construction 

ceiling is prone to spreading 

cracks.  To reduce cracking in 

these ceilings, score the plaster 

surface along the marked cut line 

with a utility knife to a depth of at 

least 1/8”.  Also, drill a 1/4” hole 

before cutting.  Make the cutout 

using your preferred tool.

1.

Completed Install

3

4