Hitachi 120gxp 安装指导
![Hitachi](https://files.manualsbrain.com/attachments/318a30c9d46cae1a03ff29c8e1a8ce7b06c25f29/common/fit/150/50/c3659964771301ddbc1d53d08b2407adc4af72464bc0f65ffa4212552d47/brand_logo.png)
Hitachi Global Storage Technologies
Page
2
version
1.1
9. Attach the IDE cable
.
•
If you have a 40-pin 40-conductor cable,
attach the system connector of the
cable to the
IDE port on the
motherboard or controller card.
The pin 1 side of the IDE cable is marked with a
stripe. The connector can only be inserted one
way.
stripe. The connector can only be inserted one
way.
•
If you have a 40-pin 80-conductor cable,
attach the drive to the appropriate color-coded
connector. Forty-pin 80-conductor cables are
color-coded black for Master, gray for Slave, and
blue for system connectors.
connector. Forty-pin 80-conductor cables are
color-coded black for Master, gray for Slave, and
blue for system connectors.
10.
Attach the power supply cable to the drive. Match
the connector bevels.
11.
Mount the drive securely.
12.
Verify all attachments.
13.
Replace the computer cover.
14.
Plug in the computer.
15.
Power on your system, Insert your operating system
setup disc or diskette and reboot your system.
setup disc or diskette and reboot your system.
16.
Verify that the hard disk is recognized by the BIOS
and is reporting the full capacity of the drive.
Instructions for accessing your BIOS can be found
in the computer system manual or in the mother-
board manufacturer documentation. If the drive is
not recognized in the BIOS, set the BIOS options of
your computer system to Auto Detection and LBA
mode if available. Once the drive is recognized
correctly in the BIOS, it is ready to be partitioned
and formatted.
and is reporting the full capacity of the drive.
Instructions for accessing your BIOS can be found
in the computer system manual or in the mother-
board manufacturer documentation. If the drive is
not recognized in the BIOS, set the BIOS options of
your computer system to Auto Detection and LBA
mode if available. Once the drive is recognized
correctly in the BIOS, it is ready to be partitioned
and formatted.
17.
Your operating system setup utility will provide
instructions on how to partition and format your
drive before it installs the operating system. For
additional information, see:
instructions on how to partition and format your
drive before it installs the operating system. For
additional information, see:
www.hgst.com/support
18. Once the operating system is installed, reboot the
18. Once the operating system is installed, reboot the
system. If the system does not boot up, check all
the settings and try again. If the system still fails to
boot up, call the Hitachi Global Storage
Technologies Support Center for assistance.
the settings and try again. If the system still fails to
boot up, call the Hitachi Global Storage
Technologies Support Center for assistance.
© Copyright Hitachi Global Storage Technologies
Hitachi Global Storage Technologies
5600 Cottle Road
San Jose, CA 95193
5600 Cottle Road
San Jose, CA 95193
Produced in the United States
6/03
All rights reserved
Deskstar™ is a trademark of Hitachi
Global Storage Technologies.
Microsoft, Windows XP, and Windows are trademarks
of Microsoft Corporation in the United States, other
countries, or both.
of Microsoft Corporation in the United States, other
countries, or both.
Other product names are trademarks or registered
trademarks of their respective companies.
trademarks of their respective companies.
References in this publication to Hitachi Global Storage
Technologies products, programs or services do not
imply that Hitachi Global Storage Technologies intends
to make these available in all countries in which Hitachi
Global Storage Technologies operates.
Technologies products, programs or services do not
imply that Hitachi Global Storage Technologies intends
to make these available in all countries in which Hitachi
Global Storage Technologies operates.
Product information is provided for information
purposes only and does not constitute a warranty.
purposes only and does not constitute a warranty.
Information is true as of the date of publication and is
subject to change. Actual results may vary.
subject to change. Actual results may vary.
This publication is for general guidance only.
Photographs may show design models.
Photographs may show design models.
11 June 2003