Ricoh 2035e 用户手册
Checking and Canceling Transmission Files
24
2
Resending a File
Machine memory stores messages
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
that could not be successfully trans-
mitted using Memory Transmission.
Use this procedure to resend these
messages.
Preparation
You should select “Store for 24
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.159 “User Pa-
rameters” (switch 24, bit 0).
hours” for “Store a message that
could not be transmitted” in User
Parameters. See p.159 “User Pa-
rameters” (switch 24, bit 0).
Note
r Files that could not be transmitted
will be kept for either 24 or 72
hours depending on how you pro-
gram this function. See p.159 “User
Parameters” (switch 24, bit 1).
hours depending on how you pro-
gram this function. See p.159 “User
Parameters” (switch 24, bit 1).
A
Press
[
Change/Stop TX File
]
.
B
Press
[
Transmit Failed File
]
.
C
Select the file you want to resend.
“TX failed” is displayed for files
that could not be sent.
“TX failed” is displayed for files
that could not be sent.
Note
r If multiple destinations were
specified, only the destination
number appears.
number appears.
r If multiple destinations were
specified, only the number of
unsent messages appears.
unsent messages appears.
D
Press
[
OK
]
.
Note
r To add destinations, press
[
Add
]
, and then specify the des-
tinations.
r To cancel transmissions, press
[
Cancel
]
. The display returns to
that of step
to resend
another file.
E
Press
[
Exit
]
.
The standby display appears.
Transmission starts.
Transmission starts.