Frigidaire glmb209d 安装指导
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly - QTY 1
2. Exhaust Duct Assembly - QTY 1
3. Screw A - QTY 2
4. Screw B - QTY 4
CABINET OR WALL CUTOUT
Cutout Dimensions
Height (A)
Minimum 16
3
/
4
” (42.5 cm)
Maximum
17” (43.2 cm)
Width (B)
Minimum 24
3
/
8
” (61.9 cm)
Maximum 24
11
/
16
” (62.7 cm)
Depth (C)
Minimum
20” (50.8 cm)
ELECTRICAL OUTLET LOCATION
Outlet should NOT be in the shaded area as indicated on
Illustration 1
Illustration 1
NOTE 1:
If the Depth (C) dimension is greater than 21” (53.3 cm),
the outlet location may be in any area on the rear wall.
If the Depth (C) dimension is greater than 21” (53.3 cm),
the outlet location may be in any area on the rear wall.
NOTE 2:
The floor of the opening should be constructed of ply-
wood strong enough to suppor t the weight of the oven
and floor load (approximately 100 pounds). The floor
should be level for proper operation of the oven. Be sure
to check the local building code as it may require that the
opening be enclosed with side, ceiling and rear partition.
The proper functioning of the oven does not require the
enclosure.
The floor of the opening should be constructed of ply-
wood strong enough to suppor t the weight of the oven
and floor load (approximately 100 pounds). The floor
should be level for proper operation of the oven. Be sure
to check the local building code as it may require that the
opening be enclosed with side, ceiling and rear partition.
The proper functioning of the oven does not require the
enclosure.
2
Installation Instructions
Illustration 1
Front Frame Assembly
Exhaust Duct Assembly
Screw A
Screw B
A
B
C
6”
(15.2 cm)
4” (10.2 cm)
4”
(10.2 cm)