Frigidaire fcs388whcd 业主指南

下载
页码 8
ELECTRONIC OVEN CONTROL
 2
Setting the Clock and Minute Timer
To Set the Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash.
1.
Push CLOCK. The word "TIME" will appear in the display. The timer allows you 5 second to go to step 2.
2.
Push and hold the UP or DOWN ARROW  until the correct time of day appears in the display. The word "TIME" will disappear
after 6 seconds and the clock will start. Or, you may push CANCEL and the word "TIME" will disappear and the clock will
start.
To Set the Minute Timer
1.
Push TIMER pad. ":00" and the word "TIMER" will glow in the display.
2.
Push and hold the UP ARROW until the desired time appears in the display. As soon as the UP ARROW is released, the time
will begin to count down in the display.
3.
When the set time has run out, the timer will beep 3 times. It will then continue to beep once every 10 seconds for 5 minutes
(or until TIMER is pushed).
The time will appear in the
display and increase in:
5 second increments
10 second increments
1 minute increments
5 minute increments
When setting the minute timer
for:
5 seconds to 2 minutes
2 minutes to 10 minutes
10 minutes to 1 hour
1 hour to 9 hours and 55 minutes
Note: The minute timer does not start or stop cooking and is not active during self-clean. It serves as an extra timer in the kitchen
that will beep when the set time has run out. The minute timer can be used independently during any of the bake or broil functions.
The timer can be set for any amount of time from 5 seconds to 9 hours and 55 minutes.
To Change the Minute Timer :
Push and hold the UP or DOWN ARROW to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out :
Push and hold the DOWN ARROW  until ":00" appears in the display.  Or you may cancel the minute timer by pushing TIMER.