IBM 560z 硬件手册
1040 Hard Disk Drive
Warning
Do not drop or apply any shock.
Do not apply pressure to the cover.
Do not touch the connector.
Do not apply pressure to the cover.
Do not touch the connector.
The hard disk drive is sensitive. Incorrect handling
can cause damage and permanent loss of data on the
hard disk. Before removing the hard disk drive, make
a backup copy of all the data on the hard disk. Never
remove the drive while the system is operating, in
suspend mode, or in hibernation mode.
can cause damage and permanent loss of data on the
hard disk. Before removing the hard disk drive, make
a backup copy of all the data on the hard disk. Never
remove the drive while the system is operating, in
suspend mode, or in hibernation mode.
Note:
For 560X, if you are replacing a 4GB hard disk
drive, reuse the shield and the tape (P/N 05K4690).
drive, reuse the shield and the tape (P/N 05K4690).
Battery Pack (1030)
1
2
3
Step
Size (Quantity)
Torque
1
M3 x 4 mm, coin screw (1)
4 kgcm
When re-installing: Make sure you use the correct screw,
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
48