IBM 560z 硬件手册
2030 LCD Inverter Card
Battery Pack (1030)
Keyboard Bezel (1040)
Keyboard Unit (1050)
LCD Assembly (1060)
LCD Front Cover (2010)
LCD Panel (2020)
Keyboard Bezel (1040)
Keyboard Unit (1050)
LCD Assembly (1060)
LCD Front Cover (2010)
LCD Panel (2020)
Warning: Be careful of high voltage on the cable.
Connect the LCD connector firmly to the inverter
card by lining them up straight:
card by lining them up straight:
Step
Size (Quantity)
Torque
2
M2.5 x 3.0 mm, brass flat-head
(2)
(2)
3 kgcm
When re-installing: Make sure you use the correct screw,
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 4 if you do not have a torque screwdriver).
ThinkPad 560Z HMM
67