Whirlpool wgd6600 用户指南

7. Check that the dryer is level. See “Level Dryer.”

WARNING

8. Plug into a grounded 3 prong outlet. Turn on power.

9. Remove any film or tape remaining on the dryer.

NOTE: Glass door models have a film on the window that 
should be removed.

10. Read “Dryer Use.”

11. Wipe the dryer drum interior thoroughly with a damp cloth to 

remove any dust.

12. If you live in a hard water area, use of a water softener is 

recommended to control the buildup of scale through the water 
system in the dryer. Over time, the buildup of lime scale may clog 
different parts of the water system, which will reduce product 
performance. Excessive scale buildup may lead to the need for 
certain part replacement or repair.

13. Test dryer operation by selecting a Timed Dry heated cycle and 

starting the dryer. For this test, do not select the Air Only modifier.

■

Dryer is plugged into a grounded 3 prong outlet.

■

Electrical supply is connected.

■

Household fuse is intact and tight, or circuit breaker has not 
tripped.

■

Dryer door is closed.

14. When the dryer has been running for 5 minutes, open the dryer 

door and feel for heat. If you feel heat, cancel cycle and close 
door. If you do not feel heat, turn off the dryer and check that the 
gas supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, then 
repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, contact a 
qualified technician.