3M SCP712 用户手册

3M

™ Super Close Projection System SCP712 

Operator’s Guide 

© 3M 2008.  All Rights Reserved. 

13 

To display the on screen menus, press the MENU button on the remote control.  Use the remote control 
Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button (bottom 
of remote control) to display it. 

Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen, 
then pull the TRIGGER button to initiate that option or setting. 

To exit an on-screen submenu, press the MENU button. 

The main menu is the first system menu to display when the MENU button is pressed.  Click on the menu icons 
to display the desired submenu. 

 

 – Select the desired computer or video input source. 

 – Adjust the following picture features: mode, brightness, contrast, color 

intensity, tint, sharpness, video noise reduction, aspect ratio, and menu reset.   
Note

: Displays only when input source is connected. 

 

 

 – Adjust the following settings for the detected signal source: over 

scan, brightness/color, horizontal position, vertical position, frequency, phase, & menu reset. 

 – Adjust the following audio settings: volume, mute, audio input (stereo mini-1, 

stereo mini-2, RCA), menu reset. 

 – Select or adjust the following settings: menu languages, auto shutoff timer, 

keystone, lamp hours, lamp mode, fan mode, projection mode, factory reset, or menu reset. 

 – Display the current system information: input resolution, H/V frequency, 

lamp hours, system hours, IP address/net mask/gateway for I/O module Ethernet interface, 
user revision. 

Main Menu