TROY Group 3005 用户指南

S 

Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A

 

A-2

 

1.  Ensure the tray selection lever is in the down (custom) position before proceeding (Figure 1 and Figure 2).

 

Verify that the tray
selection lever is in
the down position.

 

                                     Figure 1                                                                             Figure 2 
 
2.  From the printer control panel, press the  button.  Press the W arrow button until the 

PAPER HANDLING

 menu 

appears, and then press the  button again. 

3.  Press the W arrow button to select the desired paper tray (2 or 3) size, and then press the  button. 

4.  Use the UP/DOWN arrow buttons to select 

CUSTOM

, and then press the  button. 

5.  Use the UP/DOWN arrow buttons to select 

INCHES

, and then press the  button. 

6.  Use the numeric keypad to enter the 

X-DIMENSION

 value (7.17 for forward IRDs, 7.80 for return IRDs), and 

then press the  button. 

7.  Use the numeric keypad to enter the 

Y-DIMENSION

 value (8.50 for both forward and return IRDs), and then 

press the  button.