TROY Group 3005 用户指南
Section 4
Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
4-11
Selecting Security
Options (cont.)
Options (cont.)
Toner Sensor
Response
Response
H
ALT
– (default) stops all MICR print jobs. The printer control panel will display the message “LOAD
MICR TONER or six more continues will cancel job”. No MICR documents will print.
W
ARN
– pauses all MICR print jobs. The printer control panel will display the message “Non-MICR
Toner, ‘<’ to cancel”. The user must press ‘<’ to cancel or ‘Go’ to continue. If the user cancels the job,
a page will print with the message “This MICR job could not be printed because MICR toner was not
loaded in the printer – JOB PURGED”.
a page will print with the message “This MICR job could not be printed because MICR toner was not
loaded in the printer – JOB PURGED”.
I
GNORE
– allows all MICR jobs to print, regardless if MICR or non-MICR toner is installed in the printer.
F
LUSH
– purges the MICR print job from the printer memory and prints a page with the message “This
MICR job could not be printed because MICR toner was not loaded in the printer – JOB PURGED”.
Alt Command
Set
Set
An optional feature that translates the %& command set into standard PCL (Page Control Language).
Do not enable this feature unless instructed to do so by TROY Technical Support.
Do not enable this feature unless instructed to do so by TROY Technical Support.
Decryption
Password
Password
Φ
To support encryption, a decryption password must be entered that matches the encryption password.
If decryption is not going to be used, leave the decryption password field blank.
If decryption is not going to be used, leave the decryption password field blank.
Φ TROY MICR Secure Printers, MICR / IRD Secure EX Printers, and MICR Secure Memory Card Kits Only