Magellan 1400 用户指南

下载
页码 60
Traffic
38
Disabling the RDS
When you do not want to use the RDS function:
1.
Access the Main Menu and select User 
Options.
2.
Scroll down the list and select 
Traffic Options
3.
Select 
Traffic Selection.
4.
Deselect the 
Traffic Active box
5.
Click 
Save to confirm your choice.
When the RDS function is off all incoming 
Traffic messages are ignored.
FAQs
Q1- How does the TrafficKit module choose the frequency on which to receive Traffic data?
A1: This is an automated procedure. When you turn on the system, the TrafficKit module analyzes the 
5 best frequencies stored in its memory. These frequencies are classified in order of signal strength. 
The module then tests if Traffic data is available on the first station. If the first station is sending 
Traffic messages, the module will stay on that frequency, otherwise it will test the next one until it 
finds a station that delivers Traffic data.
If none of the 5 frequencies can be used, the TrafficKit module will start scanning the entire FM 
band. It will search for the best five frequencies on which Traffic data is available and will tune in to 
the strongest station. These five best frequencies will be saved in memory to be used the next time 
the system is powered up.
Q2- Why do we have to wait between 2 and 5 minutes before the RDS module starts delivering 
RDS data?
A2: This is the average time for the module to test all the possible frequencies on the FM band and 
choose the best one in terms of signal level and Traffic data availability/quality.