Epson colorpage 8000 快速参考卡片

下载
页码 13
When the printer runs out of toner, the control panel
display indicates the color of the toner cartridge that needs
to be replaced. Make sure you have the correct replacement
cartridge, as shown in the table, and then follow these steps.
Avoid touching the toner. If toner gets in your
eyes, flush them immediately with cold water. If
it gets on your skin or clothes, wash it off with
soap and cold water. Keep toner cartridges out of
the reach of children.
1
Open the front cover.
2
Check which of the four colors appears in the cartridge
installation window. If you see the color that you need
to replace, go to step 4. If you see a different color, go
to the next step.
3
Push up the switch
located above the
cartridge, then release it.
Turn the knob until it
stops. Repeat this step
until the cartridge you
want to replace appears
in the window.
4
Turn the cartridge
counterclockwise
90 degrees. Then
pull it out of the
slot and dispose of
it carefully.
5
Take a new cartridge out of its package and gently
shake it back and forth and front to back to distribute
the toner evenly.
6
Hold the cartridge with the arrow facing up and insert
it as far as possible into the cartridge slot.
7
Turn the cartridge clockwise 90 degrees, pushing it the
rest of the way into the slot. Then close the front
cover.
Make sure you turn the cartridge all the way, or
toner may leak.
1
Replacing a Toner Cartridge
Replacing a Toner Cartridge
Toner Cartridge (Cyan)
S050018
Toner Cartridge (Magenta)
S050017
Toner Cartridge (Yellow)
S050016
Toner Cartridge (Black)
S050019
front cover
installation
window
control panel
display
switch
knob