Sony VGF-HS1 手册
1
VGF-HS1 3-98-360-11(1)
Troubleshooting
Problem
Causes/measures
You have registered the
Wireless Digital Audio on the
Home Server without
specifying the device name,
but cannot find the Wireless
Digital Audio on the
VGF-WA1 page on the Home
Server Settings Page.
Wireless Digital Audio on the
Home Server without
specifying the device name,
but cannot find the Wireless
Digital Audio on the
VGF-WA1 page on the Home
Server Settings Page.
You may have connected or removed the Wireless Adapter while you
were registering the Wireless Digital Audio. Place the Wireless Digital
Audio into standby mode, turn on the Home Server and register the
device once again.
Audio into standby mode, turn on the Home Server and register the
device once again.
Others
Problem
Causes/measures
You cannot access the Home
Server Settings Page.
Server Settings Page.
The IP address is not correct. Check if the Home Server has obtained
an IP address from your network router or Internet service provider.
Press the DISPLAY button several times to display the IP address of
the Home Server. If it begins with “169.,” it is not the IP address
obtained from the network router or the Internet service provider.
Check the network devices, including cables and hub devices for
appropriate connection.
Press the DISPLAY button several times to display the IP address of
the Home Server. If it begins with “169.,” it is not the IP address
obtained from the network router or the Internet service provider.
Check the network devices, including cables and hub devices for
appropriate connection.
Press and hold the CANCEL button on the Home Server for 10
seconds or longer to clear the administrator registration and the IP
address settings.
address settings.
Indicator lights
Problem
Causes/measures
The NETSERVER indicator
light is blinking.
light is blinking.
Your Home Server is getting ready for access from the Internet. If the
indicator light stays unlit for 5 minutes or longer, run the server test on
the Home Server Settings Page (page 42).
the Home Server Settings Page (page 42).
The NETSERVER indicator
light does not turn on.
light does not turn on.
Access from the Internet is disabled. Your network router may not be
UPnP compliant or has not been assigned a global IP address. Run the
server test on the Home Server Settings Page (page 42).
server test on the Home Server Settings Page (page 42).
The HDD indicator light lights
in orange.
in orange.
The remaining free space on the hard disk drive of your Home Server
is less than 10%. Delete unnecessary data.
The HDD indicator light is
blinking in orange.
blinking in orange.
The remaining free space on the hard disk drive of your Home Server
is 1 MB or less. Delete unnecessary data.
The HDD indicator light is
blinking alternately in green
and orange.
blinking alternately in green
and orange.
The hard disk drive on your Home Server is not accessible. Restore
your Home Server on the Home Server Settings Page (page 54).