KitchenAid 1000-Watt Microwave with 7 Sensor Functions - 30" 安装指南

Recommended Vent Length

A 3

" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm)

round vent should be used.
The total length of the vent system including straight

vent, elbow(s), transitions and wall or roof caps must not

exceed the equivalent of 140 ft (42.7 m) for either type of

vent. See “Recommended Standard Fittings” section for

equivalent lengths.
For best performance, use no more than three 90° elbows.
To calculate the length of the system you need, add the

equivalent lengths of each vent piece used in the system.

See the following examples:

" x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total:

6" (15.2 cm) vent system = 73 ft (22.2 m) total:

If the existing vent is round, a rectangular to round transition

piece must be used. In addition, a rectangular 3" (7.6 cm)

extension vent between the damper assembly and rectangular

to round transition piece must be installed to keep the damper

from sticking.

ASSISTANCE

Call your authorized dealer or service center. When you call, you

will need the microwave oven model number and serial number.

Both numbers can be found on the model and serial number

plate, which is located behind the microwave oven door on the

front frame of the microwave oven.
If you need additional assistance, call us at our toll free number

or visit our website listed in the User Guide.

Replacement Parts

If any of the installation hardware needs to be replaced, call us

at our toll free number listed in the User Guide.
Following is a list of available replacement parts. You will need

your model number located on the front facing of the microwave

oven opening behind the door.

■

Damper Assembly

■

Mounting Plate

■

Upper Cabinet Template

■

Mounting Screw Kit (includes parts A-G in “Parts Supplied”

in the “Tools and Parts” section)

Accessories

Filler Panel Kits are available from your dealer to use

when installing this microwave oven in a 36" (91.4 cm)

or 42" (106.7 cm) wide opening. The filler panels come

in pairs. Each panel is 3" (7.6 cm) wide.

See your authorized dealer or service center for details.

A B

6 ft (1.8 m)

2 ft

(0.6 m)

A. One 3

" x 10" (8.3 x 25.4 cm) 90° elbow = 25 ft (7.6 m)

B. 1 wall cap = 40 ft (12.2 m)
C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)

A B

C D

6 ft (1.8 m)

2 ft

(0.6 m)

A.  Two 90° elbows = 20 ft (6.1 m)
B.  1 wall cap = 40 ft (12.2 m)
C.  1 rectangular to round transition piece = 5 ft (1.5 m)
D.  2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)

A. Filler panels

Filler Panel Kits:

8171336
8171337
8171338
8171339
99403

White
Black
Biscuit
Stainless Steel
Almond

W10823835A
SP PN W10823840

8/15