Olympus µ 400 DIGITAL 快速安装指南

          

QuickStart Guide

PREPARING THE CAMERA FOR USE

Before you begin using your Olympus Digital Camera…

The Digital Camera uses an Olympus Lithium ion battery (LI-10B) and dedicated charger (LI-
10C). This is the only battery/charger designed for use with the Digital Camera. The battery 
cannot be charged while in the camera. 

Note: The Lithium ion battery is not fully charged when the camera is 

purchased. You must fully charge the battery using the charger before first use.

• Insert the Lithium ion battery into the charger as indicated in the illustration.
• Connect the battery charger AC cable as shown to a standard wall outlet.
• To fully charge the battery requires approximately 2 hours. The charge indicator light will be red 

when charging, and will turn green when the charging process is complete.

Note: The battery and xD-Picture card compartments are accessed by opening the 

respective compartment covers.

• Slide the battery compartment cover in the direction of the arrow, and lift 

open the cover as shown in the illustration. (the direction indicated by the 

 mark on the cover)

• Insert the battery into the compartment.

• Close the battery compartment cover so that it pushes the battery in and 

slide the cover while pressing the 

 mark.

Note: If the battery compartment cover is hard to close, do 

not force it. Press 

 on the cover firmly to close the cover, 

and then slide it into position.

• To remove the battery, make sure that the monitor and the lamp at the 

side of the viewfinder are off. Return the camera to the upright position 

and tip the battery out. 

The xD-Picture Card is where the camera stores your pictures and 

is available in a variety of memory capacities. The pictures you take 

with the camera remain on the xD-Picture Card even when the 

camera is turned off and/or the battery is removed.

• Open the connector cover while pressing the   mark as in the illustration.

• Open the card cover by pulling the card cover catch towards you.

• Insert the xD-Picture Card into the spring-loaded card slot as shown in 

the illustration. Push the card fully into the slot. The card will lock into 

place when fully inserted.

• To remove, push the card all the way in to unlock it, then let it return slowly.

• Close the card cover before closing the connector cover.

• Press   to close the connector cover.

Confirm you have installed the battery and xD-Picture Card properly by 
pressing 

. The “NO PICTURE” message should be displayed in the 

monitor. Turn the camera off by pressing 

 again.

Attach the strap as illustrated to make the camera easier to handle.

TURNING ON THE CAMERA

All you need to do is slide the lens barrier open or close to turn the camera ON or OFF.

• Slide the lens barrier fully until it clicks. The lens extends.
• To turn the camera off, slide the lens barrier until you feel the first click. Wait until the lens is fully retracted, then 

close the lens barrier all the way.

Set the date and time when using the camera for the first time. This affects the way image file names are 
created, and will conveniently include this information with each picture. 

• With the front lens barrier closed, press 

 once. The monitor will turn on with “NO PICTURE” displayed in the 

monitor. The date and time can also be set when the camera is in the shooting mode.

• Press 

 to display the top menu.

• Press   to select MODE MENU.
• Press 

 to select SETUP, and then press  .

• Press 

 to select 

, and then press  .

• Use 

 to select the date format.

• Adjust the date and time in the appropriate fields by using   to select the field, and 

 to set the proper value. 

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour format.

• Press 

 to store the date and time.

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

VT420103

Printed in China

UNPACKING THE BOX CONTENTS

Gather your Digital Camera and the parts as shown in the illustration. You’ll need these to complete the steps for the camera 
set-up procedures that follow.

START HERE

It is strongly recommended that you follow these step-
by-step numbered instructions to set up and quickly 
begin using your new Digital Camera.

OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, 
NY 11747-3157, U.S.A.

http://www.olympusamerica.com/support

For more detailed instructions on advanced features, please refer to 
the printed Basic Manual included in your package, or the Reference 
Manual on the CD-ROM.

Camera Settings in Shooting Mode as shown in Monitor

Camera Settings in Playback Mode as shown in Monitor

Note: Depending on the camera settings, not all indicators will be displayed.

Wendenstrasse 14-18, 

20097 Hamburg, Germany 

http://www.olympus-europa.com

The following items are also included in the Digital Camera package: Basic Manual, video cable, RM-2 remote control, warranty card, 
registration card (not provided in some areas), and safety precautions booklet.

Digital Camera

Strap

LI-10B lithium 

ion battery

LI-10C
battery

charger

Battery

charger 

AC cable

CAMEDIA Master

CD-ROM

USB cable

(gray color)

xD-Picture Card

http://www.olympus.com/

x106_x122qsge_pquick_6.fm  Page 1  Thursday, November 6, 2003  10:48 AM